News

RA2 24D

Damper Actuators (March 2010) Torque 2 Nm to regulate dampers up to approx. 0.5 m² Versions RA2 24D, control signal on/off with power supply 24 Vac/dc RA2 220D, control signal on/off with power supply 220 Vac RA2 24V, control signal 2-10 Vdc with power supply 24 Vac/dc Position indicator Manual override by push button Direction of rotation changeable via L/R switch outside damper actuator Supplied with 0.9 m cable

Download datasheets RA2 24D and RA2 220D, with on/off control signal.pdf RA2 24V, with 2-10 vdc control signal.pdf

CDD 24S and CDD 24HTL

Carbon Dioxide (CO2) transmitter for duct mounting (January 2010) Selectable output 0-10 Vdc or 4-20 mA Modbus RS485 communication interface Measures 0-2.000 ppm Power supply 24 Vac/dc Accuracy +/-40 ppm or 3% of reading Fifteen years lifetime, calibrate themselves to local background levels Options: Humidity + Temperature outputs LCD display to display CO2 + Humidity + Temperature measurements

Download datasheet CDD 24S, (CO2) transmitter for duct mounting.pdf

FAPS

Air Flow Paddle Switch (2009) Monitoring of flow and non-agressive gaseous Min. switch on 2.5 m/sec Min. switch off 1.0 m/sec Max. switch on 9.2 m/sec Max. switch off 8.0 m/sec IP65 plastic housing Base in galvanised steel Moving arm in brass Vane in stainless steel

Download datasheet FAPS, Air Flow Paddle Switch.pdf

CMD

Carbon Monoxide (CO) Detector, CMD xxxVC-series (2009) Now also with selectable output 0-10 Vdc or 4-20 mA Electrochemical sensor element Long life sensor Wide selection of ppm ranges 0-50 ppm, 0-100 ppm, 0-150 ppm, 0-200 ppm, 0-300 ppm, 0-400 ppm, 0-500 ppm, 0-1000 ppm or 0-2000 ppm Applications Vehicle exhaust in parking structures (e.g. underground garages) Engine repair shops, Tunnels, Equipment rooms, Ventilation systems etc.

Download datasheet CMD xxxVC-series, carbon monoxide (CO) detector 0-10 Vdc or 4-20 mA output.pdf

RA damper actuators

Damper actuators, RA-series (October 2008) Torques - 4 Nm to regulate dampers up to approx. 1.0 m² - 8 Nm to regulate dampers up to approx. 2.0 m² - 16 Nm to regulate dampers up to approx. 4.0 m² - 24 Nm to regulate dampers up to approx. 6.0 m² - 32 Nm to regulate dampers up to approx. 8.0 m² Control signals on/off or 3-point, 0(2)-10 Vdc or 4-20 mA Power supply 24 Vac/dc or 220 Vac

Read more Click here to read more >>

HRS 1ES

Room Hygrostats, 1-step (August 2008) Humidifying or dehumidifying in HVAC systems, selectable via terminal wiring on pcb Setting range 35 to 100% r.H. Set point - Exposed set point for HRS 1ES - Concealed set point for HRS 1CS Power supply 24 - 230 Vac

Download datasheet HRS1, room hygrostat.pdf Back to top

AZM 010

Valve Actuator (February 2008) Control signal 0-10 Vdc Power supply 24 V Stroke 4.5 mm Regulation 30 s/mm Spring force 125 N Direction of operation selectable via wiring Lenght of cable 2 m Actuator AZM 010 is supplied with adaptor M30x1.5 to suitable for the VZH valves

Download datasheet AZM 010, valve actuator.pdf Back to top

CDD 041

New Carbon Dioxide (CO2) transmitters (November 2007) For duct mounting Output 0-10 Vdc Measures 0-2.000 ppm Power supply 24 Vac/dc Accuracy +/-40 ppm or 3% of reading No calibration required Lifetime calibration guarantee

Download datasheet CDD 041, carbon dioxide (CO2) transmitter.pdf Back to top

RM-series

New Damper Actuators RM-series (October 2007) 8 Nm torque to regulate dampers up to approx. 1.6 m² Control signals on/off or 3-point 0-10 Vdc 2-10 Vdc or 4-20 mA (jumper selectable) Power supply 24 Vac and 230 Vac Running time 156 seconds Suitable shaft dimensions max. 13 mm min. 10 mm Position indicator Angle of rotation changeable from outside Direction changeable On request 1 auxiliary switch 2 auxiliary switches On request 2 Nm, 4 Nm and 6 Nm with faster running time

Download datasheet RM8 24D and RM8 230D On/off and 3-point, 24 Vac.pdf RM8 24V and RM8 24VC Modulating (analogue), 24 Vac.pdf Back to top

MDH-series

Reduced price on MDH thermostats (August 2007) Electro Mechanical Room Thermostat Fan speed switch 3 speed (HIGH-MED-LOW) HEAT-COOL system control MDH 512 for 2-pipe system MDH 514 for 4-pipe system ON/OFF switch pushing “OFF” shuts off power program Setpoint knob +10 to +30°C Gas capsule sensing element

Download datasheet MDH, electro mechanical room thermostats.pdf Back to top

CMD-series

Carbon Monoxide (CO) Detectors with 4-20 mA Output (June 2007) Applications Vehicle exhaust in parking structures (e.g. underground garages), Engine repair shops, Tunnels Equipment rooms and Ventilation systems etc. Wide selection of ppm ranges 0-50 ppm, 0-100 ppm, 0-150 ppm, 0-200 ppm, 0-300 ppm, 0-400 ppm, 0-500 ppm or 0-1000 ppm Electrochemical sensor element Positoning stable Sensor life time expectancy 5 years, in normal operation enviroment

Download datasheet CMD xxxC, carbon monoxide (CO) detectors 4-20 mA output.pdf

CDR 100-series

Carbon Dioxide (CO2) transmitter (April 2007) Outputs - CDR 100V: 0-10 Vdc, 2-10 Vdc, 0-5 Vdc or 1-5 Vdc (selectable via jumper) - CDR 100A: 4-20 mA (3-wire) Power supply 24 Vac/dc Measures 0-2.000 ppm Accuracy +/-40 ppm @ 25°C No re-calibration required 15 years life time on CO2 sensor

Download datasheet CDR 100, carbon dioxide (CO2) transmitter.pdf

984M-series

New 984M air dp transmitter have replaced 984 (March 2007) The new “M” behind the 984 stand for the included Micro controller, as each of the new version include in standard a micro controller which caluculate the output signals. Auto zero = that is NEW: it means you push the “M” button on the bottom left side, when the transmitter is without pressure, for 5 seconds and then it calibrates automatically to 0 Volt / 4 mA . Selection of output signal = this is also NEW: Via jumper the installer can switch over from 0-10 Vdc to 4-20 mA (3-wire). As before: LED display version available Pressure ranges from 0-100 Pa up to 0-250 kPa 2 adjoining pressure ranges in one unit, pressure ranges selectable via jumper Response time 100 ms and 1 s, selectable via jumper 984M are supplied with duct fixing kit, packed together in a carton

Download datasheet 984, air dp transmitter.pdf

EB-series

Electronic Room Thermostats with Display (January 2007) 3 speed fan switch (HIGH-MED-LOW) 3 different models: - EBE 512 on/off (cool only), 2-pipe system - EBH 512 heat-off-cool, 2-pipe system - EBH 514 heat-off-cool, 4-pipe system Setting range +10 to +40°C Thermistor sensing element

Download datasheet EB, electronic room thermostats with display.pdf

930-series

New pressure range 30-400 Pa (November 2006) 930.84 with new pressure range 30-400 Pa is now available in the on/off air pressure switch 930-series 930-types with different pressure ranges: 930.80 with 20-200 Pa 930.84 with 30-400 Pa 930.83 with 50-500 Pa 930.85 with 200-1.000 Pa 930.86 with 500-2.500 Pa 930.87 with 1.000-4.000 Pa

Download datasheet 930, air pressure switch.pdf

MRT 00-series

Electro Mechanical Room Thermostats (August 2006) 3 basic models for Heating or Cooling - MRT 002 simple model without switch - MRT 007 with On-Off Rocker Switch and LED Indicator - MRT 008 with Summer-Off-Winter Rocker Switch Setpoint knob +10 to +30°C High quality bi-metal sensor for close temperature differential

Download datasheet MRT 00, electro mechanical room thermostats.pdf

VZH valves and AZA actuator

Zone Valves and Actuators (2006) 2 way, 3-way and 3-way with 4 port Sizes DN10, DN15 and DN20 Kvs values from 0.4 up to 5.0 Control signals on/off or Pulse Width Modulation (PWM) Power supply 24 Vac/dc or 230 Vac versions Normally Closed and Normally Open versions Valve adaptor concept, different adaptors available to suit other valve brands on the market

Read more Click here to read more >> Back to top

MDH-series

Electro Mechanical Room Thermostats (2006) Fan speed switch 3 speed (HIGH-MED-LOW) HEAT-COOL system control MDH 512 for 2-pipe system MDH 514 for 4-pipe system ON/OFF switch pushing “OFF” shuts off power program Setpoint knob +10 to +30°C Gas capsule sensing element

Download datasheet MDH, electro mechanical room thermostats.pdf Back to top

TDSF-series

Duct Temperature Sensors (2006) With 150 mm cable IP 56 protection 200 mm probe length other probe lenghts on request Mounting flange

Download datasheet TDSF, duct temperature sensors.pdf Back to top

Zone Valves and Actuators PN10 and PN16-series zone valves including 10C, 20C and 20CI-series actuators are available only until stock is sold out. Click here >> New valves and actuators series will be released during 2006